This Y cable is used to connect telematics, M2M devices, IoV (Internet of Vehicles) devices, fleet management devices, OBD2 GPS trackers, OBD2 CAN programming tools, ECU tuning tools or car performance tuning tools to vehicles' 16-Pin OBD2 female diagnostic ports.
This OBD2 OBDII Y Cable allows port relocation or connection of multiple telematics or IoV devices. Take the original Hyundai and Kia OBD2 female diagnostic port off its original location with tools if necessary and then insert the OBD2 male plug at the end of this OBD2 Y cable into the original Hyundai and Kia OBD2 female diagnostic port. Install the replacement Hyundai and Kia OBD2 female connector at one end of the Y ends back to the original location of the OBD2 female diagnostic port in the car. Then you can connect a telematics or IoV device to the common OBD2 female connector at the other end of the Y ends. You can also connect another telematics or tuning device to the OBD2 female connector which was installed at the original location or leave this OBD2 female connector available for diagnostic use in the future. If you leave replacement Hyundai and Kia OBD2 female connector available and then hide the telematics or IoV device connected to the common OBD2 female connector, then nobody would know that you have installed these devices without opening the panel.
This cable can also be used to connect OBD2 diagnostic devices or scanners or fault code readers (with the appropriate software).
Sending an inquiry
If you haven't found or don't have time to look for the OBD2 OBDII, J1939 or J1708 cables, adapters or connectors in our website, feel free to let us know what OBD2 OBDII, J1939 or J1708 cables, adapters or connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can also customize any OBD2 OBDII, J1939 or J1708 cables, adapters or connectors for you.
|OBD2 male plug||standard, 12V/24V|
|Pins of OBD2 male plug||copper, nickel-plated or gold-plated|
|Overmold of OBD2 male plug||slim design, right angle 90-degree|
|OBD2 female connector||standard|
|Terminals of OBD2 female connector||copper, nickel-plated or gold-plated|
|Overmold of OBD2 female connector||slim design, right angle 90-degree|
|Material of overmolded part||PVC|
|Cable shape||flat, thin|
|Wire||26AWG, pure copper|
|Material of OBD2 male and female connectors||PA66|
|Pin assignment or pin out||customized|
|Pins or terminals||copper, nickel-plated or gold-plated|
|Contact Resistance||3 ohm max.|
|Insulation Resistance||5M ohm min.|
|Working Temperature||−25ºC ~ +85ºC|
|Testing||100% open, short and mis-wire testing|
|Testing Voltage||DC300V 5M ohm/10ms|
| || |